CMT 226.metal Circular Saw Blades for Thin Metal

CMT 226.metal Circular Saw Blades for Thin Metal

Industrial HW carbide-tipped blades for dry cutting sheet metal and thin-walled profiles. Each option corresponds to a real CMT item. Select the diameter, bore, tooth count and thickness to suit your machine and workpiece section.

Dimensions and CMT codes

D: outside diameter; B: bore; Z: number of teeth; K: kerf; P: plate thickness; PH: drive pin holes. FWF geometry, 8°, hook angle 0°. MAX RPM is a speed limit, not a universal operating recommendation. The markings on the actual blade take precedence.

Use

The range is intended for dry cutting. Use only machines approved by their manufacturer for cutting metal with carbide-tipped blades. Clamp the workpiece securely and observe the machine speed, feed and limits. Cooling recommendations for HSS 227 blades do not apply to these blades. For stainless steel, select a blade explicitly intended for that material.

Selection and benefits

Carbide teeth and FWF geometry are designed for cutting metal on compatible equipment. Check all dimensions and mounting details before ordering. Select the tooth count according to the section and wall thickness. Images showing a visible code illustrate that item or the series. Options are identified by the codes and dimensions in the table.

Frequently asked questions

Will it fit any circular saw? No. Both mechanical compatibility and the machine manufacturer’s approval for metal cutting are required.

What does MAX RPM mean? The maximum permitted speed. Actual operating conditions depend on the material and machine.

CMT manufacturer information