KLEIBERIT 583.6 STP parquet adhesive, 6 kg
623.00 MDL
KLEIBERIT 583.6 one-component, hard-elastic STP adhesive for professional parquet installation on absorbent and non-absorbent substrates. Package: 6 kg. Made in Germany.
KLEIBERIT 583.6 is a one-component, hard-elastic STP adhesive for professional parquet installation indoors. It is suitable for strip and solid parquet, solid wood flooring, and two- or three-layer engineered parquet, including lacquered products, on common absorbent and non-absorbent substrates.
Key benefits
- elastic curing and durable bonding;
- simple application and rapid initial grab;
- water-resistant bond;
- suitable for installation over underfloor heating;
- can be applied directly to properly prepared common substrates;
- complies with DIN EN 14293 and DIN ISO 17178;
- very low emissions, EC1 Plus according to GEV Emicode.
Applications
For indoor parquet installation on cement screeds, chipboard, anhydrite screeds and other common absorbent or non-absorbent substrates. Perform a bonding test on difficult or non-standard substrates.
Technical data
| Base | STP, silane-terminated polymer |
| Colour | beige |
| Density at 20°C | 1.80 ± 0.05 g/cm³ |
| Consistency | stable, suitable for trowel application |
| Installation time | approx. 45–60 minutes at 20°C and 50% relative humidity |
| Curing | >3 mm per 24 hours |
| Final strength | after approx. 48 hours |
| Application temperature | +15°C to +25°C |
| Hardness | approx. Shore A 60 |
| Package | 6 kg |
Application guidance
The substrate must be level, sound, dry, dimensionally stable and free from dust, dirt or substances that may impair adhesion. Apply the adhesive evenly over the full surface with a suitable notched trowel. Place the parquet immediately into the fresh adhesive and press it down to ensure uniform wetting.
The optimum working temperature is +15°C to +25°C. Under normal conditions, the bonded floor can be walked on after approximately 24 hours; further parquet finishing is recommended after approximately 48 hours.
Storage
Keep the product tightly sealed in its original packaging under the conditions recommended by the manufacturer. Consult the technical and safety data sheets before use.
Frequently asked questions
Is it suitable for solid parquet? Yes. KLEIBERIT 583.6 is suitable for solid parquet and solid wood flooring.
Can it be used over underfloor heating? Yes, when the substrate and installation conditions meet the manufacturer’s requirements.
